2021年論文リスト
・Flow forming of wood irradiated with electron beam - molding load of irradiated wood and mechanical properties of the molded material,
Sugino, Hideaki; Tanak, Soichi; Kasamatsu, Yuga; Okubayashi, Satoko; Seki, Masako; Miki, Tsunehisa; Umemura, Kenji; Kanayam, Kozo, BioResources (2021), 16(2), 3895-3906.
・Water-free dewaxing of grey cotton fabric using supercritical carbon dioxide,
Ghanayem, Heba; Okubayashi, Satoko, Journal of Supercritical Fluids (2021), 174, 105264.
2020年論文リスト
・Influence of electron-beam irradiation on plastic flow deformation of wood,Sugino,
Hideaki; Tanaka, Soichi; Kasamatsu, Yuga; Okubayashi, Satoko; Seki, Masako; Miki, Tsunehisa; Umemura, Kenji; Kanayama, Kozo, Mokuzai Gakkaishi (2020), 66(2), 59-66.
・Preparation of cellulose triacetate aerogel via non-solvent impacted thermally induced phase separation for oil absorption,
Wang, Cheng; Okubayashi, Satoko, Journal of Applied Polymer Science (2020), 137(47), 49565.
・Polyethylenimine-Impregnated Mesoporous Delignified Wood with High Mechanical Strength for CO2/N2 Selective Adsorption,
Wang, Cheng; Biswas, Subir K.; Okubayashi, Satoko, ACS Applied Nano Materials (2020), 3(6), 5499-5508.
2019年論文リスト
・Polyethyleneimine-crosslinked cellulose aerogel for combustion CO2 capture,
Cheng Wang, Satoko Okubayashi, Carbohydrate Polymers, Vol.225, p115248, 2019
・EFFECT OF SUPERCRITICAL CARBON DIOXIDE ON DYEABILITY AND PHYSICAL PROPERTIES OF ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE FIBER,
Jaehyuk Ma, Tarek Abou Elmaaty, Satoko Okubayashi, AUTEX Research Journal, Vol.19, No.3, pp228-235, 2019
2018年論文リスト
・3D aerogel of cellulose triacetate with supercritical antisolvent process for drug delivery, Cheng Wang, Satoko Okubayashi
The Journal of Supercritical Fluids, 148, pp33–41
・Water free dyeing of polypropylene fabric under Supercritical carbon dioxide and comparison with its aqueous analogue
Tarek Abou Elmaaty, Fathy El-Taweel; Hanan Elsisi; Satoko Okubayashi
The Journal of Supercritical Fluids, Volume 139, September 2018, Pages 114-121
2016年論文リスト
・New Route for the Production of Thermo-Sensitive Polymer with Pulsed Arc Discharge on Argon-Water Interface
Hirano, Yusuke; Miyanomae, Ryota; Sasaki, Mitsuru; Quitain, Armando; Kida, Tetsuya; Okubayashi, Satoko
IEEE Nuclear and Plasma Sciences Society, Volume44, Issue2, pp 211–215
2014年論文リスト
・ A simplified measurement of adhesion between p-aramid fiber and polypropylene
Zhenzong Shao, Asami Nakai and Satoko Okubayashi
Vol. 105, Issue No. 2, pages 129-135, academic journal “The Journal of The Textile Institute”
・ Preparation of p-Aramid Aerogels Using Supercritical CO2”
Zhenzong Shao, Satoko Okubayashi
academic journal “SEN’I GAKKAISHI”
2013年論文リスト
・ A simplified measurement of adhesion between p-aramid fiber and polypropylene
Zhenzong Shao, Satoko Okubayashi
The Journal of The Textile Institute, 105(2), pp.129-135
・ 超臨界二酸化炭素によるさび染みの除去
兼田諭，鋤柄佐千子，奥林里子
繊維学会誌，Vol.69, No.12
2012年論文リスト
・ 超臨界二酸化炭素による酸性紙の脱酸処理
兼田諭，鋤柄佐千子,奥林里子
繊維学会誌 68(10), pp265-268
2011年論文リスト
・ Supercritical dyeing of polyester fibers in a mini-plant possessing internal circulator
Okubayashi, Satoko; Suzuma, Takayuki; Zhao, Chuan; Miyazaki, Keisuke; Hirogaki, Kazumasa; Tabata, Isao; Hori, Teruo
Sen'i Gakkaishi 67(2), pp.27-33
・ Impregnation of fluorescence dyes into polymer optical fiber using carbon dioxide fluid
Zhao, Chuan; Okubayashi, Satoko; Suzuma, Takayuki; Hirogaki, Kazumasa; Tabata, Isao; Hori, Teruo
Sen'i Gakkaishi 67(2), pp.34-39
・ Development of conservation procedures for late Edo period Japanese ceremonial dolls’ hair: Evaluation of effective treating reagents by using artificially degraded black-dyed silk fibres
Sato, Moe.; Okubayashi, Satoko.; Sato, Masanori
Journal of Cultural Heritage 12, pp.157-163
・ Non-destructive evaluation of historic textiles by compression measurement using the "Kawabata Evaluation System (KES)"
Sato, Moe; Okubayashi, Satoko; Sukigara, Sachiko; Sato, Masanori
e-Preservation Science8, pp.55-61
特許
| No. | 発明の名称 | 文献番号 | 出願年 |
| 1 | 超臨界流体処理装置の洗浄剤及びそれを用いた装置の洗浄方法 | 特開2017-125145 | 2016 |
| 2 | 変性繊維及びその製造方法 | 特開2014-065978 | 2012 |
| 3 | 改質糸の製造方法 | 特開2012－107362 | 2010 |
| 4 | 金属の成膜方法 | 特開2011－195859 | 2010 |
| 5 | 金属ナノワイヤーの製造方法 | 特開2011－168817 | 2010 |
| 6 | 樹脂成形体の表面加工方法及び難燃性樹脂成形体 | 特開2011－162623 | 2010 |
| 7 | 電子線照射装置及び電子線照射方法 | 特開2010－054407 | 2008 |
| 8 | 合成樹脂成形品表面の親水性疎水性制御法および合成樹脂成形品 | 特開2010－053237 | 2008 |
| 9 | 繊維材料の発泡処理方法 | 特開2009－293166 | 2008 |
| 10 | 表面改質高分子物品及びその製造方法 | 特開2008－303287 | 2007 |
| 11 | ポリ乳酸繊維構造材の改質処理方法 | 特開2008－255500 | 2007 |
| 12 | 合成樹脂成形品表面の親水性疎水性制御法 | 特許5019569 | 2006 |
| 13 | キレート繊維の製造方法及びキレート繊維並びにこのキレート繊維を含む布帛 | 特開2007－247104 | 2006 |
| 14 | 合成繊維の染色方法 | 特開2002－030583 | 2000 |
| 15 | 布帛に模様柄をつける方法ステムの構築 | 特開平07－003671 | 1993 |